| Product SKUs |
| MBD-X10DRG-Q |
X10DRG-Q |
| Physical Stats |
| Form Factor |
Proprietary |
| Dimensions |
15.2" x 13.2" (38.61cm x 33.53cm) |
| Processor/Cache |
| CPU |
Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4. |
| Dual Socket R3 (LGA 2011) supported, CPU TDP support Up to 160W, 1 QPI up to 9.6GT/s |
| Cores / Cache |
Up to 22 cores † / Up to 55MB† cache |
| Note |
† BIOS version 2.0 or above is required |
| Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| System Memory |
| Memory Capacity |
16x 288-pin DDR4 DIMM slots , |
| Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM |
| Memory Type |
2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes |
RDIMM: 4GB, 8GB, 16GB, 32GB, 64GB |
| LRDIMM: 32GB, 64GB |
| 3DS LRDIMM: 128GB |
| Memory Voltage |
1.2V |
| Error Detection |
Corrects single-bit errors |
| On-Board Devices |
| Chipset |
Intel® C612 |
| SATA |
RAID 0,1,5,10 |
| Intel® C612 controller for 6 SATA3 (6 Gbps) ports; |
| AHCI SATA |
SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| SCU SATA |
SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| ASPEED AST2400 BMC |
| Network Controllers |
Dual LAN with Intel® i350 Gigabit Ethernet Controller |
| Single LAN with Virtual Machine Device Queues reduce I/O overhead |
| Single LAN with Supports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Single LAN with 1 Realtek RTL8211E PHY (dedicated IPMI) |
| Audio |
HD Audio with optical S/PDIF |
| Graphics |
Aspeed AST2400 BMC |
| Input / Output |
| SATA |
10 SATA3 (6Gbps) port |
| LAN |
1 RJ45 Gigabit Ethernet LAN ports |
| 2 RJ45 Gigabit Ethernet LAN ports |
| USB |
4 USB 2.0 ports (2 rear + 2 headers) |
| 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) |
| Video Output |
1 VGA port |
| Serial Port / Header |
2 COM Ports (1 rear, 1 header) |
| TPM |
1 TPM Header |
| Others |
Thunderbolt AOC Header |
| Expansion Slots |
| PCI-E |
4 PCI-E 3.0 x16, |
| 1 PCI-E 3.0 x8 (in x16 slot), |
| 1 PCI-E 3.0 x8 Or 2 PCI-E 3.0 x8 (in x16 slot) |
| 1 PCI-E 2.0 x4 (in x8 slot), |
| (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) |
| System BIOS |
| BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features |
Plug and Play (PnP) |
| PCI 2.3 |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 |
| USB Keyboard support |
| SMBIOS 2.7.1 |
| UEFI 2.3.1 |
| Management |
| Software |
Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, SPM, SUM, SuperDoctor® 5, Watchdog |
| Power Configurations |
ACPI Power Management |
| CPU Fan auto-off in sleep mode |
| Power-on mode for AC power recovery |
| PC Health Monitoring |
| Voltage |
+12V, +3.3V, +5V, +5V standby, 10 (4-pin), 6 Phase-switching voltage regulator, Chassis intrusion header, Memory Voltages, Monitors for CPU Cores |
| FAN |
10x 4-pin fan headers (up to 10 fans), 10x fans with tachometer monitoring, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control |
| Temperature |
Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8 Fan Connectors, Thermal Monitor 2 (TM2) support, PECI |
| LED |
CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID |
| Other Features |
Chassis intrusion detection, Chassis intrusion header, Dual Cooling Zones, RoHS |
| Operating Environment |
| Operating Temperature Range |
10°C - 35°C (50°F - 95°F) |
| Non-Operating Temperature Range |
-40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range |
8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range |
5% - 95% (non-condensing) |
Giới thiệu
Tin tức
Bảng giá
Liên hệ
Skype
sales@dangdi.vn
Thông tin công ty
Chính sách công ty
Thông tin hướng dẫn
Tổng đài hỗ trợ
